Wondering which one is the best broadhead for Excalibur crossbow?
If that’s so then you’re on the right page because our detailed buyer’s guide is going to help you decide which one you need to go for.
The market is flooded with broadheads so it gets really difficult to choose a product that will offer you superior build quality and excellent speed.
Especially if you’re looking for a blade that is compatible with Excalibur crossbows, then the choice has to be even more narrow and precise.
When we did our research, we came across two main types of broadheads, mechanical and fixed blades. Both of these have their own pros and cons that we will be discussing at the end of this article.
But for now, why don’t you start by taking a look at the ideal broadhead for the Excalibur crossbow that we have mentioned below
Comparison of Best Broadhead for Excalibur Crossbow
|Excalibur Boltcutter 150 Grain Broadhead||0.29lbs||150|
|Excalibur X-Act Mechanical Broadhead||0.12lbs||100|
|Excalibur Boltcutter B.A.T. Broadhead||0.56lbs||150|
|Excalibur 6675 Bolt Cutter Broadhead||0.19lbs||100|
1. Excalibur Boltcutter 150 Grain 3-Blade Broadhead
No products found.
Are you looking for an excellent Excalibur crossbow broadhead that is capable of functioning at high speed?
Then you aren’t going to find something better than the Excalibur Boltcutter 150 Grain 2-Blade Broadhead.
Precision is what most hunters look for when it comes to finding blades and broadheads.
Nobody wants to end up hunting a deer that he cannot track so for this purpose, you need to make sure the blade you’re using is solid and high-grained enough to ensure severe blood loss and make tracking easier for you.
If you’re thinking about why the Boltcutter 150 is something you need to opt for, let’s list all the reasons down.
Excellent Cutting Diameter:
Now, the very first thing a hunter looks for when looking for a broadhead is the cutting diameter.
Even though most people prefer a bigger diameter to ensure extreme blood loss for a trackable hunt.
The Boltcutter 3-Blade Broadhead features a 1 1/16 inch diameter that is a little small but cuts deep through the deer to make sure it bleeds out.
So, with this broadhead on board, you won’t have to go through the trouble of finding your prey after it has sustained damage.
Another plus point of a small diameter is that it goes easy on the animal you’re trying to kill.
As soon as you hold the Excalibur Boltcutter 150 in your hands, you will see how finely it has been constructed.
The stainless steel manufacturing and silver finish really make it one hell of a blade on the market.
The blade is also heavy-duty and doesn’t get blown away by the wind or lose its accuracy like most of the other lightweight blades do.
Accuracy on Point:
What more can you need from a good broadhead?
Ah! Precision and accuracy. Well, lucky for us, Bolcutter 150 didn’t disappoint us in that domain as well.
This is a fixed blade that delivers great velocity and accuracy. Most of the hunters that reviewed it on Amazon claimed they never missed a shot.
It delivers enough damage to the target and they barely make it across 40-years before being drained out of the blood.
The Excalibur Boltcutter 3-Blade Broadhead is an excellent choice for a crossbow with higher speed and velocity. It delivers excellent precision and accuracy and hits the target right where you want it to.
With a heavy-duty build and excellent finish, the blade never disappoints.
So, if you love hunting deer and want accuracy on point with greater speed, the Excalibur Boltcutter is the one you need to try out.
No products found.
2. Excalibur X-Act 100 Grain 3-Blade Mechanical Broadhead
No products found.
The next product on our list is the Excalibur X-Act 100 Grain Mechanical Broadhead. It is one of the best crossbow broadheads in the market and is popular for its precision and accuracy.
If you want your crossbow to ensure reliability while you’re on the hunt then go with this one and trust us, you won’t regret your choice.
A lot of people found Excalibur crossbows to be pretty expensive but they also said these are some of the most spectacular ones in the market. This crossbow is capable of stopping deer in their tracks.
You won’t even have to get too close to the shot and your prey will bleed out pretty quickly.
If you’re still wondering why you should get this broadhead for Excalibur crossbow then take a look at all the reasons,
Decent Cutting Diameter:
The cutting diameter of Excalibur X-Act 100 is 1.5inch, which is decent enough for a Whiteboard size game. If you love hitting targets at a higher speed in open fields then you won’t be disappointed with this one.
The broadhead was exclusively designed to cater to all the needs of a hunter and it does so beautifully.
When it comes to buying broadheads, one problem that most people face is that it usually falls off from the crossbow but not anymore.
The X-Act 100 Mechanical Broadhead comes with a locking mechanism that keeps the head in its place securely locked.
This locking mechanism is thoroughly helpful for hunters who like to shoot arrows at a higher speed.
You will have complete control over your shot with no chance of mishitting your target. Even if there’s the hard wind blowing, your arrow will hit its target with a certain flair.
The Excalibur blade is built out of heavy-duty stainless steel. It provides impeccable support to the hunter and ensures reliability.
Because of its solid construction, you won’t have to worry about precision and accuracy. The blade was designed to be accurate and offer perfection.
We also loved the fact that it never got rusted. It’s corrosion-resistant and is meant to last for a really long time.
If you love hunting in open and large fields then X-Act 100 Mechanical Broadhead is an excellent choice.
The blade is built out of heavy-duty stainless steel and maintains precision once it’s fired in the air.
All you have to do is make your eye contact and shoot; the blade is never going to disappoint you.
No products found.
3. Excalibur Boltcutter B.A.T. Broadhead
The Excalibur Boltcutter B.A.T Broadhead was designed to offer maximum velocity and power to the user for efficient performance results.
It is an incredible broadhead and you won’t possibly find something as precise as this one.
Boltcutter B.A.T was manufactured exclusively for users who are just beginning to get the hand of archery and are using Excalibur crossbows.
We loved the construction quality of this head and the fact that it comes at an affordable price point made it just all the more worth buying,
Thinking about why you need to consider the Excalibur Boltcutter B.A.T Broadhead then here is everything you need to know,
Great Precision and Accuracy:
The reason why we chose to try this crossbow head out was that Excalibur claimed that it offers maximum precision, you can get from any broadhead.
So, we wanted to test it for ourselves before we went ahead with the recommendation,
The best part is, we absolutely loved the performance efficiency and how it never missed even a single target.
For a new archer, hitting targets accurately is the biggest hurdle which we were able to tackle with maximum efficiency.
A lot of users have complained about how their bowheads would just fly off midair because of heavy wind or they wouldn’t be able to maintain their velocity with the same efficiency they were shot with.
The heavy-duty construction of boltcutter B.A.T keeps it from making that exact mistake.
We were thrilled when it didn’t lose its way midair. Even at a far distance, the head maintained its velocity and hit the target on point.
All of this was possible because of the solid and heavy-duty construction because the wind doesn’t affect its impact.
Hunting with ease isn’t just all about hitting your target accurately but it also involves the fact that you’re able to track your target once it has been hit.
The 3-blade broadhead causes enough damage to the animal so that it bleeds out sufficiently before losing its way.
You will be able to get a thick blood train for easier tracking because of the deep cut this blade causes.
The Excalibur boltcutter B.A.T. broadhead is an excellent choice for people who are just starting out in the domain of hunting.
It offers excellent efficiency and maintains its velocity even at a far off target.
If you’re looking for a broadhead that will offer maximum performance efficiency then go for this one.
No products found.
4. Excalibur 6675 Bolt Cutter 100 – Stainless 3-Blade
No products found.
While we were on the hunt for the best broadheads compatible with Excalibur crossbows, we chose only the top four because we didn’t want to load our readers with a plethora of suggestions.
All the products that we have recommended so far have proven to be a worthy investment and never disappointed the hunters.
The final broadhead that we would like you to look into is the Excalibur 6675 Bolt Cutter 100 – Stainless 3-Blade is a fine broadhead that offers excellent precision for hunters who’d like to prey in the open and wide fields.
Apart from being beautifully constructed, the main purpose behind the launch of this broadhead was deep penetration which stood out remarkably.
Let’s look at some of the major features of 6675 Bolt Cutter 100 down below.
As you must have noticed, this is a three-blade broadhead with a longer tip as compared to what we usually see on the market.
The design of the blade is very precise and sharp to ensure it causes enough damage to the animal so that it bleeds out and barely runs over 30-yards before losing it.
It’s an incredible option for people who like to hunt bigger animals and want to ensure their prey remains trackable through a thicker blood trail.
The Excalibur 6675 Bolt Cutter is manufactured out of stainless steel. As we all know, it is a heavy-duty material that is not prone to falling off midair.
The blade maintains its shot accuracy to the highest possible and never misses the target. According to our own experience with the broadhead, we were thrilled with its performance.
It never missed a shot and we were even able to kill a deer on spot.
You might be thinking the grain velocity isn’t really up to the mark but believe the fact it delivers magnificent speed.
The 6675 Bolt Cutter was designed while keeping high-level archers in mind.
It is capable of flying at the speed of 175mph and hits accurately on the target.
Some archers even claimed they were able to hit straight through the heart on their target resulting in an instant fatality.
The Excalibur 6675 Bolt Cutter is a commendable broadhead that will never disappoint you. It is an inexpensive blade for Excalibur crossbows that will never mishit.
If you happen to be a beginner and want an incredible broadhead then go for this one.
No products found.
We are hoping that our recommendations mentioned above were able to help you through the process of choosing a broadhead but in case you still want more information regarding the purchase you’re going ahead with it.
We are going to provide you with all the information you need through this detailed buyer’s guide.
The very first thing that you’re probably going to come across is the competition that is, fixed vs mechanical broadheads! To make a more informed decision, take a look at the detailed explanation regarding both of these broadheads.
Fixed Blade Broadhead:
The fixed blade broadheads have possibly been around since the inception of time itself. In the beginning, when people used to hunt, they used the fixed blade broadhead to live and this blade proved its strength and reliability exceptionally.
However, due to the blades acting as rudders, your fixed heads suffer a lot if your crossbow isn’t aligned accurately and you will miss the target.
To extract maximum precision out of fixed broadheads, you need to be aligned with your margin as accurately as possible and then shoot. Only then it won’t miss the target and hit on point.
To compensate for this drawback of a fixed broadhead, a lot of manufacturers have now started to come up with a bigger cutting diameter so that even if the arrow mishits, it still hits close to the targeted spot.
One and the biggest pro of using a fixed arrow is that they are highly robust. The blades are fixed, they are durable, and deliver severe amounts of damage to the prey.
Mechanical broadheads feature closed blades that open up to their maximum capacity upon the impact. While fixed blades offer power, mechanical broadheads are extremely accurate in hitting the target.
They might not be hit as hard at hitting the target as the fixed broadheads but they do hit accurately on point.
This level of accuracy is only possible because of the closed blades and lower volume.
A mechanical blade doesn’t really have to tackle a lot of wind resistance because of the low profile which is why it hits the target as accurately as you can imagine.
Another plus point of a mechanical broadhead is the variety in cutting diameter.
Since we found upgrades in this head very often, you will have the option of choosing a diameter size that offers deep penetration and a more visible blood trail.
Things to Consider:
Here are a few things that you need to keep in perspective when buying a broadhead of your choice.
If you consider all of these factors before making a purchase then you will never regret your purchase.
Fixed or Mechanical Broadhead:
The very first thing you need to ask yourself is what kind of blades you really need.
For someone who is an expert in archery, going for a fixed blade won’t be an issue in fact; it would be a better option since a fixed blade offers more power and hard impact.
Whereas if you’re a newbie and don’t really understand the concept of archery, then starting out with a mechanical blade would be a wise decision.
Mechanical blades aren’t really impacted by foreign aspects and offer excellent precision so you’re really going to have a fun experience.
Material and Design:
On to the next point, never compromise on the material and design of a broadhead.
There are hundreds, maybe even thousands of options available in the market and you need to go for a highly precise, reliable head that can offer maximum precision.
Take a look at how they will cut through the skin of your prey. We always prefer straight blades with no curves whatsoever. These blades are far sharper and offer great penetration, leaving a trackable blood trail behind.
Also, choose stainless steel blades. A blade needs to be heavy duty so that it doesn’t get swayed away by wind and what better material to choose than heavy-duty steel?
When we compared the fixed blades with mechanical ones, we realized that mechanical blades offer bigger cutting diameters than fixed blades.
It will ensure your target has had a solid impact and will be leaving a blood trail that will be easy to follow.
Also, pay attention to the cutting surface. While most of the heads available are 3-blades but we would also suggest you check out 4-blade heads.
They pack more power and hit effectively, maybe even cause fatality on spot.
To make the flight time shorter and more precise, you first need to fine-tune your crossbows first.
We have never had a problem shooting a mechanical or even a fixed broadhead with a finely tuned crossbow.
Check and clean your tuning house beforehand. You need to be able to choose a broadhead that is compatible with your tuning and match its velocity.
Frequently Asked Questions:
No hunter is ever going to be happy returning from a trip empty-handed.
And after reading all the data that we had compiled for your benefit, we hope that you will be able to choose a broadhead that makes your hunting experiences all the more enjoyable.
We hope this article has been thoroughly helpful in cutting off any misconceptions you may have had regarding broadheads.
If you have any suggestions and recommendations in this regard, do let us know through your feedback below.